NETDRIVE 2 BANDWIDTH LIMIT HOW TO

To limit the bandwidth of the ONT, you can configure the DBA profile on the OLT. Now, you only need to know that the OLT allocates bandwidth to the ONT through DBA. To resolve the problem, ITU-T Recommendation G.984.3 is developed, which defines the DBA protocol for managing upstream PON traffic.

The management cannot be implemented or may cause severe efficiency decrease because ODN is a passive network.ДЄ mechanism for upstream PON traffic management has been a primary focus in standardization of PON traffic management. However, the mechanism requires QoS management in an ODN network. PON requires an effective TDMA mechanism to control the upstream traffic so that data packets from multiple ONUs do not collide in upstream transmission. In the PON system, the OLT controls an ONU's upstream data traffic by sending authorization signals to the ONU. If you need to limit the bandwidth of the ONT, you can only use the OLT to limit the bandwidth. Our network data information is transmitted and received through the channel between the OLT and the ONT.

ONT bandwidth depends on the OLT configuration, just as our network speed depends on the ISP network service package. These parameters are only the specifications of the ONT hardware. You may learn from the ONT documentation that:

NETDRIVE 2 BANDWIDTH LIMIT HOW TO

Today, I want to share with you how to limit the bandwidth of a device.ДЇirst of all, I need to explain that the bandwidth limit cannot be set on the ONT. In the Access Network Forum, many friends are asking about how to limit the bandwidth of a device.

Netdrive 2 bandwidth limit